Delage 15 S8 manual
A few words about the building .....
read the whole manual before construction
I leave the material to the customer's choice.
I've found that if I recommend PETG, for example, not everyone can print it out nicely. ABS does not hold on another bed.
The model is designed so that if you choose your favorite material it will print without any problems. I have already printed them from PETG, ABS, PLA, CPE.
Choose a material best for your printer and has beautiful layers.
I recommend a layer of 0.2 mm, just 20% fill. For bearings use and caradans use min 75% infill.
For tires 5%
But if your printers combine layers, take advantage of it. Alternatively, if you want a very detailed surface, print on a 0.1 mm layer.
- Servo JX servo 6221MG - 1x (or similar, power 8kg)
- Engine - 35 T (coil) :
- Regulator -180 A max , 11,V
- Baterry LiPo 2cell 7,4V - dimensions: 70x30x20mm (space for battery)
online manual : https://www.3dtlac.xyz/navody/