Bugatti 35 manual

A few words about the building .....

Read the whole manual before construction

I leave the material to the customer's choice i use PLA for all.
Choose a material best for your printer and has beautiful layers.
I recommend a layer of 0.2 mm, just 20% fill. For bearings use and caradans use min 75% infill.

For tires 5%
But if your printers combine layers, take advantage of it. Alternatively, if you want a very detailed surface, print on a 0.1 mm layer.

PARTS:


  • Servo JX servo 6221MG - 1x (or similar, power 3-7 kg)

https://www.bighobby.cz/JX-servo-PDI-6221MG-digital-62g-0-16sec-20kg-d1499.htm

  • Engine - 35 T (coil) :

https://www.modelcentrum.cz/produkt/Stejnosmerny-motor-540-Hackmoto-V2-35T-i115508

  • Regulator -180 A max , 11,V

https://velkoobchod.conrad.sk/auto-brushed-reely-wp40-zatizitelnost-max-180-a-limit-motoru-otacky-12.k1399921

  • Baterry LiPo 3cell 11,1V - dimensions: 85x40x25mm (space for battery)

online manual : https://www.3dtlac.xyz/bugatti-35-manual/